buddy
03/04/2016, 15h21
As tu vérifié si dans les autres logs tu avais des messages concernant la température ?
2016-04-03:15:13:01 - Disk 4 - 190 Airflow_Temperature_Cel 0x0022 079 071 000 Old_age Always - 21 (Min/Max 19/30) 2016-04-03:15:13:01 - Disk 5 - 190 Airflow_Temperature_Cel 0x0022 077 069 000 Old_age Always - 23 (Min/Max 21/32) 2016-04-03:15:13:01 - Disk 6 - 190 Airflow_Temperature_Cel 0x0022 079 071 000 Old_age Always - 21 (Min/Max 19/30) 2016-04-03:15:13:01 - Disk 7 - 190 Airflow_Temperature_Cel 0x0022 078 069 000 Old_age Always - 22 (Min/Max 20/31)
Apr 3 07:44:46 ns3645612 smartd[1680]: Device: /dev/bus/0 [megaraid_disk_04] [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 82 to 81
=== START OF INFORMATION SECTION === Device Model: INTEL SSDSC2BB800H4 Serial Number: BTWH44740533800CGN LU WWN Device Id: 5 5cd2e4 04b725e71 Firmware Version: D2010380 User Capacity: 800 166 076 416 bytes [800 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Apr 3 12:09:12 2016 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: ATA return descriptor not supported by controller firmware SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1035 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 25775440473 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 079 071 000 Old_age Always - 21 (Min/Max 19/30) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 32 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 149239 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 163 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 63 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 62127 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 149239 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 263658 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1 - # 2 Short offline Completed without error 00% 1 - # 3 Short offline Completed without error 00% 0 - # 4 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.