OVH Community, votre nouvel espace communautaire.

SPA112 : le correspondant ne m'entend pas


seb12345
07/11/2015, 13h56
Citation Envoyé par Gaston_Phone
Quels codecs utilises-tu. Seb ?
Avant, j'utilisais uniquement le 711 et suite à une demande j'ai ajouté le 729 (dans le manager) mais cela n'a rien changé. Le problème c'est que ce n'est pas systématique. Avec certains numéro je n'ai jamais aucun problème. Avec d'auter numéro, j'ai parfois le problème

- - - Updated - - -

Ne trouvant pas de solution, j'ai demandé de changer la BBOX 3 normale par la BBox 3 VOIP afin d'éliminer le SPA112. Solution win win car j'élimine une cause de problème et je récupère un port LAN :-)

Gaston_Phone
07/11/2015, 01h35
Quels codecs utilises-tu. Seb ?

Gaston_Phone
07/11/2015, 00h54
Si c'est OK avec Zoiper, oublie ces histoires de port.

seb12345
06/11/2015, 18h17
Je viens de lire un truc interpelant sur le site de Proxiums :
Quels ports ont été bloqués et ne peuvent être ouverts ?

Les ports suivants ont été bloqués et ne peuvent pas être ouverts :

Port 25 pour le protocole TCP (fermé aux trafics entrant et sortant)
Ce port était utilisé pour installer un serveur mail, même non protégé. Nos serveurs ont eu des problèmes de surcharge à cause de l'augmentation constante de spamming provenant de notre réseau. De plus, nous avons régulièrement été placés sur listes noires à cause de clients ayant des serveurs mails non protégés. Nous avons donc fermé ce port.
Port 135 pour le protocole UDP (fermé au trafic entrant)
Ce port était utilisé par le virus Blaster pour attaquer Windows, il a donc été fermé.
Ports 137, 138 et 139 pour le protocole UDP (fermé au trafic entrant)
Ces ports permettaient à des personnes mal intentionnées d'accéder aux ordinateurs où le "Partages de fichiers et d'imprimantes" était activé dans la configuration réseau.
Port 445 pour le protocole TCP (fermé au trafic entrant)
Ce port était utilisé par le virus Deloder.A pour attaquer Windows, il a donc été fermé.
Ports 1080, 1555, 2001, 2280, 2281, 2282, 2283, 2284, 2285, 3128, 8080, 8081, 9000
Ces ports étaient fréquemment utilisés pour des serveurs proxy, ce qui permettait à n'importe qui de se connecter sur votre système et d'envoyer du spamming à partir de votre ordinateur. Tous ces ports ont été bloqués.
Certains ports au-delà de 1024
Les ports dont le numéro est 1024 ou au-delà sont parfois fermés, parfois ouverts : cela dépend des virus, abus et autres menaces du moment.
Est ce qu'on utilise pas les ports 30 000 à 40 000?

seb12345
06/11/2015, 18h05
Zut encore un appel où l'intrelocuteur ne m'entendait pas :-s.

Est ce qu'il y aurait moyen d'avoir le backup d'un spa112 ... fonctionnel ?

seb12345
03/11/2015, 21h56
Suivant certaines personnes, ce serait :
"C'est une partie du réseau qui est totalement ouverte au WAN, mais qui est totalement isolé du réseau privé"

Gaston_Phone
01/11/2015, 01h36
Qu'est ce que ce cirque de DMZ ? ? ?

abds69
31/10/2015, 13h27
ok mets la DMZ sur 192.168.1.199 et test ?

seb12345
28/10/2015, 20h31
Voici ce que j'ai fait dans la page de config du SPA112:

Internet Settings
Internet Connection Type :
Connection Type: Static IP
Internet IP Address: 192.168.1.199
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
MTU: AUTO
Optional Settings
Host Name: SPA112
Domain Name:
DNS Server Order: DHCP - manuel
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0

sur la Bbox 3 :
Mappage de port : rien
Contrôle parentale : jamais bloquer pour ce périphérique
Pare-Feu : niveau parefeu : faible et Hôte DMZ activé

abds69
28/10/2015, 15h30
essayes de te connecter en web sur ta bbox3 et vérifier l'activation de l'upnp et tu fous une DMZ sur un des ports sur lequel tu colles ton téléphone. Ehu plutot fixer une adresse IP pour le téléphone et mettre la DMZ dessus.

abds69
28/10/2015, 15h11
C'est plutôt que la BBBOX modifie les coms du spa112 ou l'empêche de communiquer...

seb12345
27/10/2015, 19h11
Avis à la population :-)

Voici 2 log : le 1er d'un appel qui a fonctionné et le seconde d'un appel qui n'a pas fonctionné

Oct 27 14:47:06 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:14,Min:47,Sec:6
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 20
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 30
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd 2
Oct 27 14:47:34 SPA112 user.notice sprvoip: Seq Num 368
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd - 2, response 2
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd 10, EP 2, Node ID 0
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd - 10, response 10
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 14:47:34 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 14:47:37 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:14,Min:47,Sec:37
Oct 27 14:47:37 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:37 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:37 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:37 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:38 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:39 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:39 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 14:47:39 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd 10, EP 3, Node ID 0
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd - 10, response 10
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 22, ParameterValue 1
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 60
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 70
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:49 SPA112 user.notice sprvoip: cmd - 20, response 34
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd 10, EP 3, Node ID 0
Oct 27 14:47:51 SPA112 user.notice sprvoip: !!! Response (11) != CH_EP_CONNECT_ACK !!!
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd - 10, response 11
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 22, ParameterValue 1
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 60
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 70
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:47:51 SPA112 user.notice sprvoip: cmd - 20, response 34
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd 10, EP 3, Node ID 0
Oct 27 14:48:03 SPA112 user.notice sprvoip: !!! Response (11) != CH_EP_CONNECT_ACK !!!
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd - 10, response 11
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 22, ParameterValue 1
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 60
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 70
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 14:48:03 SPA112 user.notice sprvoip: cmd - 20, response 34
Oct 27 14:48:08 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:14,Min:48,Sec:8
Oct 27 14:48:39 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:14,Min:48,Sec:39
Oct 27 14:48:54 SPA112 daemon.notice msgswitchd[164]: MSGSWD RTCP Reqt len 12 Data 2,3797936,335,156
Oct 27 14:48:54 SPA112 daemon.notice msgswitchd[164]: MSGSWD RTCP Reqt len 12 Data 2,0,3170920,156
Oct 27 14:48:54 SPA112 kern.warning [17421857.224000] voice_release, chan: 0
Oct 27 14:48:54 SPA112 user.notice sprvoip: cmd 11, EP 3
Oct 27 14:48:54 SPA112 user.notice sprvoip: cmd - 11, response 12
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 16, NodeId 2
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 16, response 20
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 12, NodeId 0
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 12, response 14
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 2
Oct 27 14:48:56 SPA112 user.notice sprvoip: Seq Num 390
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 2, response 2
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 10, EP 2, Node ID 0
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 10, response 10
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 16, NodeId 2
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 16, response 20
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd 12, NodeId 0
Oct 27 14:48:56 SPA112 user.notice sprvoip: cmd - 12, response 14
Oct 27 14:49:11 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:14,Min:49,Sec:11
Et celui qui n'a pas fonctionné (enfin, mon interlocuteur ne m'a pas entendu

Oct 27 15:05:51 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:15,Min:5,Sec:51
Oct 27 15:05:56 SPA112 syslog.notice syslog-ng[130]: STATS: dropped 0
Oct 27 15:06:22 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:15,Min:6,Sec:22
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 20
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 30
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd 2
Oct 27 15:06:45 SPA112 user.notice sprvoip: Seq Num 398
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd - 2, response 2
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd 10, EP 2, Node ID 0
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd - 10, response 10
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 15:06:45 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 15:06:48 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:48 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:49 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:50 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:50 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:50 SPA112 user.notice sprvoip: cmd - 14, response 42
Oct 27 15:06:50 SPA112 user.notice sprvoip: cmd - 14, response 43
Oct 27 15:06:54 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:15,Min:6,Sec:54
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd 10, EP 3, Node ID 0
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd - 10, response 10
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 22, ParameterValue 1
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 60
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 70
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:00 SPA112 user.notice sprvoip: cmd - 20, response 34
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd 10, EP 3, Node ID 0
Oct 27 15:07:02 SPA112 user.notice sprvoip: !!! Response (11) != CH_EP_CONNECT_ACK !!!
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd - 10, response 11
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 22, ParameterValue 1
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 60
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 70
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:02 SPA112 user.notice sprvoip: cmd - 20, response 34
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd 10, EP 3, Node ID 0
Oct 27 15:07:04 SPA112 user.notice sprvoip: !!! Response (11) != CH_EP_CONNECT_ACK !!!
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd - 10, response 11
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 22, ParameterValue 1
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 27, ParameterValue 60
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd 5, EP 2, ParameterType 26, ParameterValue 70
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd - 5, response 8
Oct 27 15:07:04 SPA112 user.notice sprvoip: cmd - 20, response 34
Oct 27 15:07:07 SPA112 user.notice sprvoip: cmd - 20, response 42
Oct 27 15:07:07 SPA112 user.notice sprvoip: cmd - 20, response 43
Oct 27 15:07:24 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:15,Min:7,Sec:24
Oct 27 15:07:39 SPA112 daemon.notice msgswitchd[164]: MSGSWD RTCP Reqt len 12 Data 2,3941728,335,156
Oct 27 15:07:39 SPA112 daemon.notice msgswitchd[164]: MSGSWD RTCP Reqt len 12 Data 2,0,3170920,156
Oct 27 15:07:39 SPA112 kern.warning [17422982.304000] voice_release, chan: 0
Oct 27 15:07:39 SPA112 user.notice sprvoip: cmd 11, EP 3
Oct 27 15:07:39 SPA112 user.notice sprvoip: cmd - 11, response 12
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd 16, NodeId 2
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd - 16, response 20
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd 12, NodeId 0
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd - 12, response 14
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd 2
Oct 27 15:07:41 SPA112 user.notice sprvoip: Seq Num 420
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd - 2, response 2
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd 10, EP 2, Node ID 0
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd - 10, response 10
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 15:07:41 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 15:07:42 SPA112 user.notice sprvoip: cmd 16, NodeId 2
Oct 27 15:07:42 SPA112 user.notice sprvoip: cmd - 16, response 20
Oct 27 15:07:42 SPA112 user.notice sprvoip: cmd 14, NodeId 0
Oct 27 15:07:42 SPA112 user.notice sprvoip: cmd - 14, response 18
Oct 27 15:07:42 SPA112 user.notice sprvoip: cmd 12, NodeId 0
Oct 27 15:07:42 SPA112 user.notice sprvoip: cmd - 12, response 14
Oct 27 15:07:55 SPA112 daemon.notice system[116]: NTP update successfully, Year:2015,Month:10,Day:27,Hour:15,Min:7,Sec:55

seb12345
27/10/2015, 18h41
Donc si le problème ne vient pas d'OVH, il a plus de chance que cela provienne de la config du SPA112.

PierrYves L
27/10/2015, 12h23
Bonjour seb12345,

En effet, j'ai pu analyser votre ligne.

Je ne constate pas de soucis de configuration, la ligne est bien enregistrée sur nos serveurs. Au niveau de vos appels, il n'y a pas d'erreurs particulières, mise à part quelques pertes de paquets sur certains appels.

Afin de valider le bon fonctionnement de cette ligne, je vous invite à effectuer un test en configurant celle-ci sur un autre réseau.

N'hésitez pas à revenir vers moi de nouveau si besoin

Cordialement,
PierrYves L.

seb12345
26/10/2015, 20h30
Citation Envoyé par PierrYves L
Bonjour,

Pouvez-vous me communiquer votre identifiant client, ainsi que les 5 derniers numéros de votre ligne s'il vous plait?

Je pourrai ainsi analyser votre ligne et corriger ce type de phénomène.

Merci d'avance pour votre retour.

Bien cordialement,
PierrYves L.
Avez vous pu analyser la ligne pour "voir" le problème?

Merci

seb12345
25/10/2015, 12h51
Malheureusement , il n'y a plus d'onglet téléphone ... car il n'y a plus de port VOIP sur la BBOX 3

abds69
24/10/2015, 19h52
http://www.mimimi.be/2013/03/belgacom-bbox-and-sip.html

Sur la 2 onglet de gauche, téléphone, général. Tu as ça sur la 3 ?

seb12345
24/10/2015, 12h53
Citation Envoyé par abds69
Regardes d'abord dans la box, pour upnp, voir tester un port ouvert en 5060 . dans avancées, t'as pas un truc TELEPHONE sur cette box.
Parle-t-on de la même box ? La Bbox 3 de Belgacom/Proximus?

abds69
23/10/2015, 23h19
Regardes d'abord dans la box, pour upnp, voir tester un port ouvert en 5060 . dans avancées, t'as pas un truc TELEPHONE sur cette box.

seb12345
23/10/2015, 19h53
Citation Envoyé par abds69
Ca pue le problème de NAT.
Dans ta config, t'as oublié de copier/coller la config NAT keep alive et NAT mapping.

vérifies que l' UPNP activé sur ta box aussi.

désactives SIP ALG si tu as cette option.

codec sur G711.

A+
La config dont vous parlez se trouver sur la Box ou dans le SPA112?

Merci

seb12345
23/10/2015, 19h41
Citation Envoyé par PierrYves L
Bonjour,

Pouvez-vous me communiquer votre identifiant client, ainsi que les 5 derniers numéros de votre ligne s'il vous plait?

Je pourrai ainsi analyser votre ligne et corriger ce type de phénomène.

Merci d'avance pour votre retour.

Bien cordialement,
PierrYves L.
sl-

abds69
23/10/2015, 15h10
Ca pue le problème de NAT.
Dans ta config, t'as oublié de copier/coller la config NAT keep alive et NAT mapping.

vérifies que l' UPNP activé sur ta box aussi.

désactives SIP ALG si tu as cette option.

codec sur G711.

A+

PierrYves L
23/10/2015, 13h37
Bonjour,

Pouvez-vous me communiquer votre identifiant client, ainsi que les 5 derniers numéros de votre ligne s'il vous plait?

Je pourrai ainsi analyser votre ligne et corriger ce type de phénomène.

Merci d'avance pour votre retour.

Bien cordialement,
PierrYves L.

Gaston_Phone
22/10/2015, 22h34

seb12345
22/10/2015, 16h13
Le problème ne semble pas réglé car je viens d'effectuer un appel et mon correspondant ne m'entendait pas alors que je l'entendais parfaitement

seb12345
22/10/2015, 15h32
Citation Envoyé par Gaston_Phone
Si cela fonctionne avec Zoiper, BBOX 3 de chez Belgacom / Proximus n'est pas concerné par le problème.

Tu as très bien fait de faire le test avec ZOIPER. Cela a permis de mettre hors du coup la BOX.
Tu devrais provisoirement de désactiver TOUS les Codecs à l'exception du G711.
Comme cela, il n'y aura ps de négociation de codec et seul le G711 sera utilisé, comme avec Zoiper.
Via le manager , je n'utilisais que le 711. Je viens de le modifier via le g711, g729. Mon 1er appel fonctionné sans soucis! Reste à voir sur le long terme.

Merci PierrYves L.

Bonne journée à tous
Via le manager, j'avais uniquement laissé le G711. Je

PierrYves L
22/10/2015, 13h09
Bonjour seb12345,

Afin d'améliorer vos communications téléphoniques, je vous invite à configurer depuis votre espace client les codecs g711, g729 sur votre ligne.

je vous invite dans un premier à vous rendre sur votre espace client disponible sur https://www.ovhtelecom.fr/espaceclient/login/, puis cliquer sur:

-Ancienne interface client
-Téléphonie
-Sélectionnez la ligne qui présente des problèmes
-Téléphone
-Codecs
-Modifier
-g711, g729
-Valider

N'hésitez pas à revenir vers moi si besoin.

Cordialement,
PierrYves L.

Gaston_Phone
22/10/2015, 10h07
Citation Envoyé par klim94
ne faudrait-il pas un 2è codec préféré ?
non.

klim94
22/10/2015, 09h56
Audio Configuration
Preferred Codec: G711u
Second Preferred Codec: Unspecified
Third Preferred Codec: Unspecified

Que se passe-t-il si en face le correspondant a le même type de configuration mais avec un Codec préféré différent de G711 ?

Ne faudrait-il pas un 2è Codec préféré ?

Gaston_Phone
21/10/2015, 22h26
Si cela fonctionne avec Zoiper, BBOX 3 de chez Belgacom / Proximus n'est pas concerné par le problème.

Tu as très bien fait de faire le test avec ZOIPER. Cela a permis de mettre hors du coup la BOX.
Tu devrais provisoirement de désactiver TOUS les Codecs à l'exception du G711.
Comme cela, il n'y aura pas de négociation de codec et seul le G711 sera utilisé, comme avec Zoiper.

seb12345
21/10/2015, 19h55
Bonjour à tous,

J'ai un SPA112 (acheté par mes soins) et lorsque j'effectue certains appel, mon correspondant ne m'entend pas. Pour certains correspondants, je n'ai jamais de soucis, pour d'autre, souvent. Je viens de faire le test avec ZOIPER vers un correspondant qui ne m'entendait pas et je n'ai pas eu de soucis. Donc le soucis devrait situer donc soit au niveau de la configuration du SPA112 soit au niveau de la Box (BBOX 3 de chez Belgacom / Proximus )

Voici la config
Software Version: 1.3.5(004p)

Call Feature Settings
Blind Attn-Xfer Enable: no
MOH Server:
Xfer When Hangup Conf: yes
Conference Bridge URL:
Conference Bridge Ports: 3
Enable IP Dialing: no
Emergency Number: Mailbox ID:
Feature Key Sync: no

Proxy and Registration
Proxy: sip.ovh.be
Outbound Proxy: 91.121.129.20:5962
Use Outbound Proxy: yes
Use OB Proxy In Dialog: yes
Register: yes
Make Call Without Reg: no
Register Expires: 1800 Ans Call Without Reg: no
Use DNS SRV: no
DNS SRV Auto Prefix: no
Proxy Fallback Intvl: 3600 Proxy Redundancy Method: normal
Mailbox Subscribe URL: Mailbox Subscribe Expires: 2147483647

Subscriber Information
Display Name: 00324XXXXXXX User ID: 00324XXXXXXX
Password: xxxxx Use Auth ID: YES
Auth ID: 00324XXXXXXX Resident Online Number:
SIP URI:

Supplementary Service Subscription
Yes partout sauf "Service Announcement Serv:

Audio Configuration
Preferred Codec: G711u
Second Preferred Codec: Unspecified
Third Preferred Codec: Unspecified
Use Pref Codec Only: no
Use Remote Pref Codec: no
Codec Negotiation: Default
G729a Enable: Yes
Silence Supp Enable no:
G726-32 Enable: Yes
Silence Threshold: medium
FAX V21 Detect Enable: yes
Echo Canc Enable: yes
FAX CNG Detect Enable: yes
FAX Passthru Codec: G711u
FAX Codec Symmetric: yes
DTMF Process INFO: yes
FAX Passthru Method: NSE
DTMF Process AVT: yes
FAX Process NSE: yes
DTMF Tx Method: Auto
FAX Disable ECAN: no
DTMF Tx Mode: Strict
DTMF Tx Strict Hold Off Time: 70 FAX Enable T38: no
Hook Flash Tx Method: none
FAX T38 Redundancy: 1
FAX T38 ECM Enable: yes
FAX Tone Detect Mode: caller or callee
Symmetric RTP: no
FAX T38 Return to Voice: no
Modem Line: no
RTP to Proxy in Remote Hold: no

Dial Plan
Dial Plan: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

FXS Port Polarity Configuration
Idle Polarity: Forward
Caller Conn Polarity: Forward
Callee Conn Polarity: Forward

SIP Parameters
Max Forward: 70 Max Redirection: 5
Max Auth: 2 SIP User Agent Name: $VERSION
SIP Server Name: $VERSION SIP Reg User Agent Name:
SIP Reg Starting Sequence Number: SIP Accept Language:
DTMF Relay MIME Type: application/dtmf-relay Hook Flash MIME Type: application/hook-flash
Remove Last Reg: no
Use Compact Header: no
Escape Display Name: no
RFC 2543 Call Hold: yes
Mark All AVT Packets: yes
AVT Packet Size: ptime
SIP TCP Port Min: 5060 SIP TCP Port Max: 5080
CTI Enable: no
Keep Referee When REFER Failed: no
Caller ID Header: PAID-RPID-FROM

SIP Timer Values (sec)
SIP T1: .5 SIP T2: 4
SIP T4: 5 SIP Timer B: 32
SIP Timer F: 16 SIP Timer H: 32
SIP Timer D: 32 SIP Timer J: 32
INVITE Expires: 240 ReINVITE Expires: 30
Reg Min Expires: 1 Reg Max Expires: 7200
Reg Retry Intvl: 30 Reg Retry Long Intvl: 1200
Reg Retry Random Delay: 0 Reg Retry Long Random Delay: 0
Reg Retry Intvl Cap:0
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
RTP Parameters
RTP Port Min: 30000 RTP Port Max: 40000
RTP Packet Size: 0.030 RTP Tx Packet Size Follows Remote SDP: yes
Max RTP ICMP Err: 0 RTCP Tx Interval: 0
No UDP Checksum: no
Stats In BYE: yes
SDP Payload Types
NSE Dynamic Payload: 100 AVT Dynamic Payload: 101
INFOREQ Dynamic Payload: G726r32 Dynamic Payload: 2
G729b Dynamic Payload: 99 EncapRTP Dynamic Payload: 112
RTP-Start-Loopback Dynamic Payload: 113 RTP-Start-Loopback Codec: G711u
NSE Codec Name: NSE AVT Codec Name: Telephone-event
G711u Codec Name: PCMU G711a Codec Name: PCMA
G726r32 Codec Name: G726-32 G729a Codec Name: G729a
G729b Codec Name: F729ab EncapRTP Codec Name: encaprtp
NAT Support Parameters no
Handle VIA received: no
Handle VIA rport: no
Insert VIA received: no
Insert VIA rport: no
Substitute VIA Addr: no
Send Resp To Src Port: no
STUN Enable: no
STUN Test Enable:no
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl: 15
Redirect Keep Alive: no

Linksys Key System Parameters
Linksys Key System: no
Multicast Address: 224.168.168.168:6061
Key System Auto Discovery: yes
Key System IP Address:
Force LAN Codec: none
Station Name:

Voici une partie de la config (la plus intéressante j'espère )

Merci de votre aide