OVH Community, votre nouvel espace communautaire.

nettoyage de SDA1 à 100% besoin d'aide


shootfox
09/11/2014, 16h42
j'ai laissé un seul fichier index .html dans la racine ,
il est affiché
si je laisse mes fichiers .php même sans aucune .htaccess ça marche pas,

Donc je pensé que c'est de la cause de php trop vieux ou qui a été touché par mon nettoyage

j'ai un php4 et un php5.2 installé sur ma machine
j'ai voulu intallé php 5.4 j'ai téléchange avec Wget les tar.gz depui php.net
j'ai fait
tar xvzf ...
mais quand je fait

> cd /home/install_php/php-5.5.18
> apt-get install php5-common libapache2-mod-php5 php5-cli php5-mysql php5-curl php5-cgi php5-cli php5-dev
/bin/bash: apt-get: command not found

je suis su WEBMIN en ligne de commande un gars de support technique m'a assuré que je peux faire l'installation d'ici

Merci

shootfox
09/11/2014, 16h35
les log sont comme ça
/usr/local/apache/logs/error_log
j'ai des lignes :
[Sun Nov 09 12:53:54 2014] [error] [client 182.118.21.250] Premature end of script headers: category.php, referer: http://www.treuil74.fr/10017-afn-acc...erway=asc&p=26
[Sun Nov 09 12:53:54 2014] [error] [client 182.118.21.250] SecurityException in Application.cpp:162: Do not have root privileges. Executable not set-uid root?, referer: http://www.treuil74.fr/10017-afn-acc...erway=asc&p=26
[Sun Nov 09 12:53:54 2014] [error] [client 182.118.21.250] *** glibc detected *** double free or corruption (fasttop): 0x080734d0 ***, referer: http://www.treuil74.fr/10017-afn-acc...erway=asc&p=26

buddy
09/11/2014, 15h23
Citation Envoyé par shootfox
Je avancé un peu,

Une idée?
Merci
lire les logs et surtout les error_log d'apache ...

shootfox
08/11/2014, 23h24
Je avancé un peu,
j'ai rédemaré le serveur ,
mais le sites affiche toujours ERROR 500 Internal Server Erro
j'ai rénomé .htaccess
j'ai mis la racine à 705 à la place de 755
mais rien changé


Une idée?
Merci

shootfox
08/11/2014, 17h31
bon j'explique,
pour instant le seul mode de me conecter sur le serveur est en mode rescue
, près que j'ai fait le nettoyage
je me suis deconnecter, j'ai redemarer à partir de ovhmanager, il m'a dit que il a redemarer
après je voulu acceser le serveur avec WEBADMIN - j'arrive pas
pour repondre au question je me suis reconecter en ssh rescue
MErci

- - - Updated - - -

j'ai l’impression que le démarrage du l'interface ovhmanager prend pas en compte le fichier de redémarrage utilisé par webmin, donc il redémarre pas le services de mails, mysql, etc...
je connais pas un autre moyen de me connecter au serveur, jusqu’au maintenant l'accesWEBMIN etais suffisa

shootfox
08/11/2014, 17h17
la dernier partie de dmesg
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
device-mapper: raid: Loading target version 1.5.0
lguest: mapped switcher at ff829000
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_util
hv_vmbus: registering driver hv_balloon
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (15761 buckets, 63044 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_set: protocol 6
ipip: IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
l2tp_ip: L2TP IP encapsulation support (L2TPv3)
l2tp_netlink: L2TP netlink interface
l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
8021q: 802.1Q VLAN Support v1.8
sctp: Hash tables configured (established 65536 bind 65536)
Key type dns_resolver registered
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
openvswitch: Open vSwitch switching datapath
Using IPI No-Shortcut mode
registered taskstats version 1
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:02: setting system clock to 2014-11-08 16:14:56 UTC (1415463296)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: gzip image found at block 0
EXT2-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 620k freed
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode

- - - Updated - - -

comment nettoyer les logs??

- - - Updated - - -

@ InboX
comme je dit j'ai pas d’expérience avec les serveurs , c'est possible que j'ai fait une bêtise , mais quelle ??

elouez
08/11/2014, 17h11
C'est le dmesg du rescue que tu nous as donné : "Linux version 3.10.23-xxxx-std-ipv6-32-rescue" ...

Nettoie tes logs, essaie de redémarrer, puis reviens en rescue et envoie nous les debug, syslog et/ou dmesg de /mnt/var/log/.

shootfox
08/11/2014, 17h06
Merci pour ton répons
le home est sur sda2 utilisé à 6% donc je m'embete pas
le dmesg


root@rescue:/mnt# cat /mnt/var/log/debug
cat: /mnt/var/log/debug: No such file or directory
root@rescue:/mnt# cat var/log/debug
cat: var/log/debug: No such file or directory
root@rescue:/mnt#

root@rescue:/mnt# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpuacct
Linux version 3.10.23-xxxx-std-ipv6-32-rescue (kernel@kernel.ovh.net) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Tue Mar 18 14:58:56 CET 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003e72cfff] usable
BIOS-e820: [mem 0x000000003e72d000-0x000000003e788fff] ACPI NVS
BIOS-e820: [mem 0x000000003e789000-0x000000003f594fff] usable
BIOS-e820: [mem 0x000000003f595000-0x000000003f59cfff] reserved
BIOS-e820: [mem 0x000000003f59d000-0x000000003f629fff] usable
BIOS-e820: [mem 0x000000003f62a000-0x000000003f62efff] reserved
BIOS-e820: [mem 0x000000003f62f000-0x000000003f6a8fff] usable
BIOS-e820: [mem 0x000000003f6a9000-0x000000003f6e8fff] ACPI NVS
BIOS-e820: [mem 0x000000003f6e9000-0x000000003f6f1fff] usable
BIOS-e820: [mem 0x000000003f6f2000-0x000000003f6fefff] ACPI data
BIOS-e820: [mem 0x000000003f6ff000-0x000000003f6fffff] usable
BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: OVH START/D945GCNL, BIOS NL94510J.86A.0020.2007.0907.1417 09/07/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f700 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03F800000 mask FFF800000 uncachable
2 base 03F700000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [c00fe200]
initial memory mapped: [mem 0x00000000-0x027fffff]
Base memory trampoline at [c008b000] 8b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37000000-0x371fffff]
[mem 0x37000000-0x371fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x36ffffff]
[mem 0x34000000-0x36ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37200000-0x373fdfff]
[mem 0x37200000-0x373fdfff] page 4k
BRK [0x0239a000, 0x0239afff] PGTABLE
BRK [0x0239b000, 0x0239efff] PGTABLE
BRK [0x0239f000, 0x0239ffff] PGTABLE
RAMDISK: [mem 0x3e543000-0x3e70cfff]
Allocated new RAMDISK: [mem 0x37232000-0x373fb171]
Move RAMDISK from [mem 0x3e543000-0x3e70c171] to [mem 0x37232000-0x373fb171]
ACPI: RSDP 000fe020 00014 (v00 INTEL )
ACPI: RSDT 3f6fd038 0003C (v01 INTEL D945GCR 00000014 01000013)
ACPI: FACP 3f6fc000 00074 (v01 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: DSDT 3f6f7000 04C39 (v01 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: FACS 3f6a9000 00040
ACPI: APIC 3f6f6000 00078 (v01 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: WDDT 3f6f5000 00040 (v01 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: MCFG 3f6f4000 0003C (v01 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: ASF! 3f6f3000 000A6 (v32 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: HPET 3f6f2000 00038 (v01 INTEL D945GCR 00000014 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x373fdfff]
HighMem [mem 0x373fe000-0x3f6fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00100000-0x3e72cfff]
node 0: [mem 0x3e789000-0x3f594fff]
node 0: [mem 0x3f59d000-0x3f629fff]
node 0: [mem 0x3f62f000-0x3f6a8fff]
node 0: [mem 0x3f6e9000-0x3f6f1fff]
node 0: [mem 0x3f6ff000-0x3f6fffff]
On node 0 totalpages: 259544
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3982 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 222206 pages, LIFO batch:31
HighMem zone: 263 pages used for memmap
HighMem zone: 33356 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0x40000000-0xfff7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:96 nr_cpumask_bits:96 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @f69de000 s30784 r0 d14272 u45056
pcpu-alloc: s30784 r0 d14272 u45056 alloc=11*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257776
Kernel command line: root=/dev/ram0 init=/linuxrc initrd=rescue/initrd.img-rescue.v42.gz rw console=tty0 basenfs=178.33.124.65:/home/pub/rescue.v7 powernfs=178.33.124.65:/home/pub/pro-power commonnfs=178.33.124.65:/home/pub/commonnfs log_buf_len=2M BOOT_IMAGE=rescue/bzImage-2.6-rescue-32 BOOTIF=01-00-1c-c0-49-a7-23
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0003f700)
Memory: 1006856k/1039360k available (12700k kernel code, 31320k reserved, 4059k data, 620k init, 133424k highmem)
virtual kernel memory layout:
fixmap : 0xff833000 - 0xfffff000 (7984 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc205f000 - 0xc20fa000 ( 620 kB)
.data : 0xc1c673d5 - 0xc205e2c0 (4059 kB)
.text : 0xc1000000 - 0xc1c673d5 (12700 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=96 to nr_cpu_ids=4.
NR_IRQS:6400 nr_irqs:712 16
CPU 0 irqstacks, hard=f6408000 soft=f640a000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.208 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.41 BogoMIPS (lpj=7980832)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 48k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f6482000 soft=f6484000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (7980.83 BogoMIPS)
devtmpfs: initialized
xor: measuring software checksum speed
pIII_sse : 7220.000 MB/sec
prefetch64-sse: 8174.000 MB/sec
xor: using function: prefetch64-sse (8174.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
raid6: mmxx1 2603 MB/s
raid6: mmxx2 3009 MB/s
raid6: sse1x1 1555 MB/s
raid6: sse1x2 2191 MB/s
raid6: sse2x1 2985 MB/s
raid6: sse2x2 3410 MB/s
raid6: using algorithm sse2x2 (3410 MB/s)
raid6: using ssse3x1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xf0000000] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0x50100000-0x5017ffff]
pci 0000:00:02.0: reg 14: [io 0x20e0-0x20e7]
pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0x50180000-0x501bffff]
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0x2080-0x209f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0x2060-0x207f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0x2020-0x203f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0x501c0000-0x501c03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x20b0-0x20bf]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0x20c8-0x20cf]
pci 0000:00:1f.2: reg 14: [io 0x20ec-0x20ef]
pci 0000:00:1f.2: reg 18: [io 0x20c0-0x20c7]
pci 0000:00:1f.2: reg 1c: [io 0x20e8-0x20eb]
pci 0000:00:1f.2: reg 20: [io 0x20a0-0x20af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0x1000-0x10ff]
pci 0000:03:00.0: reg 18: [mem 0x50000000-0x50000fff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0x50000000-0x500fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: Enabled 1 GPEs in block 00 to 1F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x3e72d000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f595000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f62a000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f6a9000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f6f2000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f700000-0x3fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x0500-0x053f] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0680-0x06ff] has been reserved
system 00:05: [io 0x0770-0x077f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x50200000-0x503fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x50400000-0x505fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x50600000-0x508fffff pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x50900000-0x50afffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x50b00000-0x50cfffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0x50d00000-0x50efffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x50f00000-0x510fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x50200000-0x503fffff]
pci 0000:00:1c.0: bridge window [mem 0x50400000-0x505fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x50600000-0x5061ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0x50000000-0x500fffff]
pci 0000:00:1c.1: bridge window [mem 0x50600000-0x508fffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0x50900000-0x50afffff]
pci 0000:00:1c.2: bridge window [mem 0x50b00000-0x50cfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0x50d00000-0x50efffff]
pci 0000:00:1c.3: bridge window [mem 0x50f00000-0x510fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0x50200000-0x503fffff]
pci_bus 0000:02: resource 2 [mem 0x50400000-0x505fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x50000000-0x500fffff]
pci_bus 0000:03: resource 2 [mem 0x50600000-0x508fffff pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0x50900000-0x50afffff]
pci_bus 0000:04: resource 2 [mem 0x50b00000-0x50cfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0x50d00000-0x50efffff]
pci_bus 0000:05: resource 2 [mem 0x50f00000-0x510fffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
pci_bus 0000:06: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 1832k freed
kvm: no hardware support
has_svm: not amd
kvm: no hardware support
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM installed
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Key type cifs.spnego registered
NTFS driver 2.1.30 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.22)
JFS: nTxBlock = 7880, nTxLock = 63046
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
bio: create slab at 1
Btrfs loaded
GFS2 installed
ceph: loaded (mds proto 32)
msgmni has been set to 1709
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
GHES: HEST is not enabled!
ioatdma: Intel(R) QuickData Technology Driver 4.00
XENFS: not registering filesystem on non-xen platform
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
brd: module loaded
loop: module loaded
nbd: registered device at major 43
events: mcg drbd: 3
drbd: initialized. Version: 8.4.3 (api:1/proto:86-101)
drbd: built-in
drbd: registered as block device major 147
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20b0-0x20b7
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Adaptec aacraid driver 1.2-0[30200]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
mpt2sas version 14.100.00.00 loaded
mpt3sas version 01.100.01.00 loaded
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
VMware PVSCSI driver - version 1.0.2.0-k
hv_vmbus: registering driver hv_storvsc
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
slram: not enough parameters.
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k

InboX
08/11/2014, 17h01
Salut,

tu n'as pas effacer un truc qui fallait pas ? ^^
Pour moi une bonne réinstallation va faire du bien a la machine.

elouez
08/11/2014, 16h58
Ce qui te prends le plus de place c'est ton /home . Donc ce serait plus logique de s'attaquer à lui, et de faire du nettoyage dessus.
Par contre tu peux supprimer ton spool et tes logs : # rm /var/spool/* /var/log/*

Mais maintenant que tu as fait du nettoyage, pourquoi ne redémarre-t-il pas ? Normalement il devrait redémarrer.
Pourrais tu nous donner le # dmesg et # cat /var/log/debug

shootfox
08/11/2014, 16h33
J'ai reviens avec des precisions
j'ai déporter le /usr/portage sur /home/portage, on
effet il existais déjà donc j'ai supprimé /usr/portage
le fichier /etc/make.conf etait déjà :
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
GENTOO_MIRRORS="http://mirror.ovh.net/gentoo-distfiles/ ftp://mirror.ovh.net/gentoo-distfiles/"
USE="-curl -X mmx sse sse2 -gtk -sdl -nptl -xpm"
PORTDIR_OVERLAY="/usr/local/portage-ovh"
FEATURES="-sandbox"
PORTAGE_BINHOST="ftp://ftp.ovh.net/made-in-ovh/release/binhost/2.14-2.15/32"
CONFIG_PROTECT="/usr/local/apache/conf /usr/local/lib/php5 /usr/local/lib/php4"
PORTDIR="/home/portage"
DISTDIR="/home/portage/distfiles"
PKGDIR="/home/portage/packages"

(END)

j'ai maintenant sda1 à 88%
mais le serveur ne redemare pas
avez vous une idée ??
n'importe quelle idée est très biens venue, j'ai pas d’expérience
Merci

shootfox
08/11/2014, 15h33
j'ai ajoute que le log et l'email ne sont pas dans var
root@rescue:/mnt/var# ls -lia
total 52
320001 drwxr-xr-x 13 root root 4096 Apr 23 2012 .
2 drwxr-xr-x 19 root root 4096 Nov 7 11:19 ..
320004 drwxr-xr-x 4 40 src 4096 Apr 21 2010 bind
320012 drwxr-xr-x 4 root root 4096 Feb 14 2006 cache
320737 drwxr-xr-x 3 root root 4096 Apr 21 2010 db
339775 drwxr-xr-x 2 root root 4096 Feb 14 2006 empty
339777 drwxr-xr-x 22 root root 4096 May 13 2008 lib
325435 drwxrwxr-x 3 root 14 4096 Nov 6 19:10 lock
320002 lrwxrwxrwx 1 root root 9 May 12 2008 log -> /home/log
320003 lrwxrwxrwx 1 root root 15 May 12 2008 mail -> /var/spool/mail
325438 drwxr-xr-x 10 root 502 4096 Jun 2 2006 qmail
340006 drwxr-xr-x 9 root root 4096 Nov 6 20:59 run
325710 drwxr-xr-x 7 root root 4096 Jun 2 2006 spool
340079 drwxr-xr-x 2 root root 4096 Feb 14 2006 state
340081 drwxrwxrwt 4 root root 4096 Apr 21 2010 tmp

shootfox
08/11/2014, 15h13
Bonjour,
j'ai un serveur ( hérité) sda1 de 4G depuis plus d'un anneé il étais à 96-97% , envieront une fois par mois il arrivé a 100% il étais suffisamment de redemander et c'etais bon.

Depuis jeudi il veux plus redemarer, je me suis connecté en ssh mode rescue j'ai lui monté j'essai de faire menage mais je sai pas qui nettyer,
le fichiers classique de log de mysql, sont nettoyé
voilà un df -kah
root@rescue:/mnt# df -kah
Filesystem Size Used Avail Use% Mounted on
rootfs 493M 89M 405M 18% /
none 493M 89M 405M 18% /
none 0 0 0 - /sys
178.33.124.65:/home/pub/rescue.v7 1.9T 184G 1.7T 10% /nfs
178.33.124.65:/home/pub/pro-power 1.9T 184G 1.7T 10% /power
178.33.124.65:/home/pub/commonnfs 1.9T 184G 1.7T 10% /common
proc 0 0 0 - /proc
tmpfs 10M 144K 9.9M 2% /dev
devpts 0 0 0 - /dev/pts
tmpfs 99M 64K 99M 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 198M 0 198M 0% /run/shm
rpc_pipefs 0 0 0 - /nfs/var/lib/nfs/rpc_pipefs
fusectl 0 0 0 - /sys/fs/fuse/connections
/dev/sda1 2.9G 2.9G 0 100% /mnt
/dev/sda2 685G 35G 616G 6% /mnt/home
root@rescue:/mnt#


et
du -sh
root@rescue:/mnt# du -sh /mnt/*
6.7M /mnt/bin
11M /mnt/boot
104K /mnt/dev
4.5M /mnt/etc
35G /mnt/home
0 /mnt/httpd.conf
5.0M /mnt/lib
16K /mnt/lost+found
16K /mnt/mnt
4.0K /mnt/opt
4.0K /mnt/proc
2.4M /mnt/root
7.9M /mnt/sbin
2.2M /mnt/sessions
4.0K /mnt/sys
4.0K /mnt/tmp
1.6G /mnt/usr
1.3G /mnt/var
root@rescue:/mnt#
et

je pende à désinstaller des programmes mais je sais pas quoi.
j'ai appellé plusieurs fois le support technique de OVH, j'ai un incident ouvert depuis jeudi un fois il veux s'occupé d'autre fois ils tuche pas les donnés client , ???
Merci d'avance pour votre aide